InCarz ArmAngle CARBON

CMC-5005-CA
Universal magnetic holder "InCarz ArmAngle" for the dashboard with a special gel nano suction cup "AnyGrip" and an adjustable inclination of 0-180 ° on the articulated arm. The gel suction cup also holds on structured dashboards, where attachment with ordinary holders is impossible due to the non-adhesion of the surface. The adhesion is enhanced by a 3M sticker in the middle of the gel suction cup. Four ultra-strong magnets of the N45 class will keep the phone on the holder even in the case of significant uneven roads and high speeds of up to 350 km / h.
The possibility of position variability in a suitable place on the dashboard meets the safety conditions for placing a mobile phone in a car, where the phone does not obstruct the driver's view. Very easy installation by simply applying the gel suction cup to the dashboard and affixing a 3M sticker. All you have to do is glue one of the supplied metal plates to the back of the mobile phone or insert it into the phone case. All you have to do is zoom in and it locks itself on the holder due to the magnetic force. The holder offers the same stability in vertical and horizontal position.

Compatible with all mobile phones regardless of size, diagonal and weight
Mounting on the car dashboard
Gel nano suction cup "AnyGrip" allows attachment even on structured dashboards, where attachment with standard holders is impossible due to non-adhesion of the surface
360 ° joint of the magnetic part for omnidirectional adjustment of the phone's viewing angle
180 ° adjustable arm inclination
Tightening nuts in the rear magnetic part for quick and comfortable adjustment to the optimal viewing angle
4 extra strong N45 class magnets with above-average size (12 × 4 mm)
The magnets keep the phone in the holder even with significant uneven road surfaces and high speeds of up to 350 km / h
It consists of two main parts - the holder itself and two versions of metal plates, which are either glued directly to the back of the phone or inserted into the case of a mobile phone
The self-adhesive plate uses the original 3M sticker with extra strong adhesion and long life resistant to low and high temperatures
The unified size of the metal plates 40 × 58,5 mm guarantees comfortable contact of the phone with the magnetic holder and compatibility with all phones
The delivery includes two transparent self-adhesive foils preventing damage to the surface of the mobile phone by metal plates
For phones with a metal back, there is no need to use metal contact pads
Compatible with all mobile phone cases up to 2 mm thick
Possibility of vertical and horizontal orientation of the mobile phone
Maximum elimination of mobile phone vibrations in the holder thanks to a strong anti-vibration surface contact layer
Convenient placement of the phone in the holder and its removal with one hand
Possibility of seamless connection of the charging cable to the mobile phone
Dimensions (W × H × D): 60 × 80 × 220 mm
Weight: g 140
Magnetic holder
Self-adhesive 3M metal plate for direct gluing on a mobile phone or its packaging
Metal non-stick plate intended for insertion under the cover of a mobile phone
Protective self-adhesive foil (2 pieces)

Related Products

close
Choose your preferred store
Choose a store where you can buy the product.